ATR500 / P/N 500-(0XX)-(0XX) / 500-(1XX)-(1XX)
Operation and Installation
14
Dokument-Nr.: 01.1251.010.71e / Revision: 2.01
2.5 Frequency
Settings
2.5.1
Manual Input
turn
in position
With
the input area (MHz or kHz) can be selected:
The selected value is then adjusted with the lower rotary knob
.
Now the modified Standby frequency can be activated by pressing
(exchanges active and Standby frequency)
2.5.2 Select
frequency
from memory position
Turn memory position selector
(M1 … M9)
The stored frequency appears and is set as active frequency; hence it is
displayed in the upper row of the screen.
2.5.3
Save a new frequency
In order to save a new frequency this needs to be manually entered and
activated according to the steps described in section 2.5.1.
Select memory position with
(M1 … M9).
Memory place and the corresponding
frequency are displayed and active.
The priory manual entered frequency is
kept in memory, but is not yet saved.
Press
to finally store the
kept
frequency on the selected memory position. The
priory stored frequency is overwritten.
