Funktel f.airnet D5 Series, Руководство по эксплуатации, Страница: 24 / 160

24
Starting up D5 / FC5 Series
card to the memory of a D5 or FC5 handset is also retained after re-
moval of the MEM card.
 Operation with MEM-Cards of devices of the D4, FC4 and IH4 Series as
well as the D11 and FC11 Series.
 In this mode, the D5 or FC5 is fitted with a MEM Card from the DECT
handset of the D4/FC4/IH4 or D11/FC11 Series.
 The D5 or FC5 uses the login data, device settings and phone book en-
tries that are stored on the MEM cards of the above-mentioned types of
devices..
 Additions and changes to the phone book as well as further logging into
PBXs are possible in this operating mode and are likewise stored on the
MEM cards of the above-mentioned types of devices.
 Whenever a D5 or FC5 logs in without a MEM card (see Operation with-
out MEM card), it can neither be seen nor selected when operating with
a MEM card of the above-mentioned types of devices. These logins can
only be used again once the MEM card has been removed
If your business handset has not yet been assembled
If your handset has not yet been assembled completely when you receive it,
the following steps are requited to start up the D5 or FC5:
 If the D5/FC5 replaces a DECT™ handset of type D3, FC1, FC4,or IH4
that is already logged-in (enrolled) then the MEM card with the login
data of the D3, FC1, FC4, IH4 or D11/FC11 handset that is to be re-
placed
must be placed in the D5 or FC5.
If no MEM card is placed in the D5 or FC5, then the handset is in "Operat-
ing mode without MEM card“!
 Fit the battery
 Pull the protective film off the display,
 Set up and connect the charger.
 If you wish to operate the D5 or FC5 in "Operating mode without MEM
card“, then the system coordinator of the telephone system or a service
technician must log in the handset on your telephone system.
Exception: If you wish to operate the D5/FC5 with a MEM card and the