ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
21
Document-Nr.: 01.142.010.71e / Revision:1.03
In order to re-enable transmission in this case, release PTT and push it
again.
2.7 Reception
When receivin
g, an antenna symbol “
” is shown in front of the active
frequency.
When having dual watch active (see 3.4) this can be shown for the
standby frequency, too.
When having more than one PTT button and microphones
connected, the system can be configured (chapter 0) to use
only one PTT button for transmissions.
