ATR833 / P/N 833-(xxx)-(2xx)
Operation and Installation
28
Document-No.: 01.1403.010.71e / Revision: 3.01
The following microphone inputs are available at the ATR833:
Microphone Input
Left
Right
standard
(headset)
MLS
MRS
dynamic
(glider’s gooseneck
microphone)
MLD
MRD
With
VOX set to 5 previously
, select the microphone to adjust with
SET
.
For each microphone input
– if applicable: with running engine – speak
with normal volume into the selected microphone, and use the
rotary knob to
adjust the sensitivity, so that the bar reaches the
middle of the scale
, as depictured above.
Per microphone input a maximum of two parallel installed microphones
may be connected. (see 4.6.1).
A short press of
SET
switches to the next configuration item, a long
press of
SET
exits the configuration menu.
For correct microphone sensitivity configuration, VOX must be
set to 5 previously (for VOX-settings refer to section 0).
Don’t care for volume of the headset’s/speakers output during
this configuration, as this is set separately by INT.
