Fundaciocim BCN3D, Руководство пользователя, Страница: 8 / 45

8
RepRapBCN
User Manual
2. SETTING UP YOUR BCN3D+
Unboxing
The BCN3D+ is delivered inside a properly secured cardboard box, measuring 600mm long, 570mm wide and
590mm high. To properly unbox BCN3D+ the following steps must be followed:
1. Remove the packing tape and open the box.
2. Remove the upper cardbox cover. Inside we will find our assembled printer and an accessories box fixed to the
corrugated board.
3. Cut the cables ties fixing the accessories box and remove.
4. Carefully remove the protective cardboard from the sides.
5. Grab the upper frame and lift the printer out of the box.
6. Cut the zip ties attaching the lower cover to the machine.
7. Once out of the box, cut the zip ties holding the axes in place:
• Ties holding the extruder carriage
• Ties holding the hotbed
• Ties holing the Z axis in its upper position
8. Open the accessories box, comprising:
• Hotbed glass
• Power cable
• 3DLAC
• Tools
9. Unwrap the hotbed glass and use the included clamps to fix it onto the hotbed.
10. Plug the printer using the included power cable
11. Remove the toolkit and the fixing spray and leave them close to the machine, we will use them regularly.
12. Fit the supplied spool onto the holder mounted on top of the printer
13. The machine is ready to load the spool filament and the necessary files to print.
4. 7.
8
• SD Card
• 1 Kg Spool
• Frog + Calibration cube
• USB containing full documentation
x3