FUNAI WD6D-M100, Руководство по обслуживанию

Страница: 24 / 99

1-10-3 E9TF0FIS
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39, 45 and 51) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
Disc is full.
(No area for new recording) Insert the recordable disc with
enough recording space.
30 No available recording space.
You cannot record more than
99 titles on one disc.
(The maximum is 99.)
Delete unnecessary titles.
31
The 99 title limit has been reached.
(Video Format Disc)
32
The 99 title limit has been reached. (VR
Format Disc)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
Delete unnecessary chapters. 33
The 999 chapter limit has been reached.
(VR Format Disc)
You cannot record on this disc
as Control Information is full.
Insert a new disc. 34
No available recording space for Control
Information.
You cannot record on the disc
as Power Calibration Area is
full.
Insert a new disc. 35 PCA is Full. (in REC start)
This disc is already finalized.
Release the finalizing for this
disc.
36 It is finalized. (Video Format Disc)
Can not record on this disc. Repeat the same operation.
37 Access to Memory Area range outside.
38 Sector Address is wrong.
39 BUP writing error of chapter editing.
This program is not recordable
in +VR mode. You cannot record copy-
prohibited programs.
45
During the CGMS picture input (+VR
Format Disc).
This Program is not allowed to
be recorded.
Receive PAL/SECAM signal. 51
When you receive signal other than PAL/
SECAM.
Message Solution
Error
No.
Error Description
Error message is not
displayed.
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
- Insert a recordable videotape
with a record tab.
40
- Some portion has not been recorded
because of program overlapping.
- Recording did not start at the start time.
- No Videotape is inserted.
Videotape ran out during recording.
Turn the power on and set the
clock correctly then set timer
programming again.
41 Power failed
Insert the recordable disc. 42 No disc when recording
Message Solution
Error
No.
Error Description
A program with the error number is grayed out on the timer programming list.
Error number