FUNAI LT7-M19BB, Руководство пользователя, Страница: 4 / 32

4
EN
THINGS TO DO FOR THE FIRST TIME
ATTACHING THE STAND
You need to attach the stand to the unit to display upright. Make sure the front and rear of the stand match the proper direction.
To remove the stand from this unit
Unscrew the Phillips pan screws indicated by “
C
”. Pull up
the stand in the direction of the rear of the unit. Be careful
not to drop the stand when you remove it.
1)
Place the unit face down onto
the soft stuff such as a cloth on a
table. Be careful not to damage
the unit screen.
2)
Hang the hook under the
bottom of the main unit to the
stand’s hole (shown arrow
A
),
then slide down the stand in the
direction of the screen (shown
arrow
B
).
Make sure not to put the AC
power cord between the stand
and the unit.
3)
Drive Phillips pan screws in
the 3 threaded holes at the
bottom of the stand with a
screwdriver tightly.
front sid
e
front side
B
A
A
screw holes
C
Note:
• When attaching the stand, make sure that all the screws are tightly fastened. If
the stand is not attached properly, the unit may fall down, resulting in injuries
as well as damage to the unit.
• Make sure to use the table which can support the weight and size of the unit.
• Make sure that the table is in a stable location.