-9-
3
AUTO OPERATION
Press button to start air-conditioner. Now, fan speed is auto. Press to select fan
speed.
To stop working, please press button again.
Setting temperature is not shown on screen of the control board when in AUTO operation.
When operation shifts from auto into heating or cooling operation, indoor fan speed can be
set in low speed, middle speed, high speed or auto mode.
After air-conditioner operation for about 15 minutes, if you feel too warm or too cool, please push
or to adjust the temperature. Thus , you can get most comfort temperature.
Auto operation is a economical mode, which can select suitable operation mode according room-
temperature.
Push button to start air-conditioner.
Push button to select operation. Each pushing of this button changes the mode of operation
in this order from auto airflow venting cooling dry heating.
Push button to set fan speed.
Push or button to set needed temperature.
If you feel too warm, please push to decrease the temperature; if you feel too cool, please
push to increase the temperature. Thus ,you can get most comfort temperature.
Push button again, operation will stop.
4
COOLING
DRY AND HEATING OPERATION
5
ADJUSTMENT OF FAN SPEED AND HOW TO DO TIMING
Press button to adjust fan speed. Fan speed changes in the recyclable order from low
speed ,middle speed ,high speed to auto in turn when press button once.
Select HIGH SPEED for stronger cooling.
To set timer-on or timer-off, push or button, then push or to adjust time.
To cancel the timer function ,please push button or button again.
--
C
+
+
C
+
+
C
--
C
--
C
+
+
C
+
+
--
Operation instruction
