background image

ASE 65 

3” 

33 ft

ASE 65 

4” 

24 ft

ASE 65 

5” 

24 ft

ASE 65 

7

/

₈” 

18 ft

ASE 85 

4” 

33 ft

ASE 85 

5” 

33 ft

ASE 85 

5 7

/

₈” 

26 ft

ASE 125 

5” 

49 ft

ASE 125 

7

/

₈” 

44 ft

6

3.2.2 Hose selection

Select the appropriate hose length, see table.

    

If you are using your own hose, the optional AES

    

is available which is a custom hose fitting kit and 

    

complies with the safety requirements for the 

    

product.

For information relating to AES see section 

8 Accessories

.

4 Operating instructions

4.1 Installation and startup

4.1.1 Before startup

    

Before startup the device, read the instructions 

    

provided in 

chapter 2.4 Safety

.

4.1.2 Assembly and operation

    

Any faults must be rectified before

    

operational startup.

 1. 

Make sure that any electrical connections to 

accessories 

   have been made correctly.

 

5 Troubleshooting

5.1 Troubleshooting guide

  

Model 

Dimension Ø 

Rolled up length

 Problem

  1. The hose does not stop

   in the correct position.

  2. Leakage sound in bearing.

Possible cause

Hose stop.

The negative pressure in 

the system is too high.

Bearing worn out.

Actions

Adjust the position of hose stop.

Lower the negative pressure (max. 2500 Pa).

Change bearing.

6 Care Instructions

6.1 Activation

 

Disruptions caused by lack of or faulty

 

maintenance may result in high costs for the 

 product.

The checklist for maintenance is designed for normal use of 

the product. The recommended intervals are approximate 

and refer to the time after the first startup. Depending on 

the changing operating conditions between the different 

systems, the intervals for recommended maintenance may 

differ. The user should therefore determine their own 

maintenance intervals.

 

Please remember that only original spare parts 

 

may be used.

When replacing damaged fasteners, only those of identical 

quality (strength, material) and type may be used

.

Содержание Movex ASE Series









Отзывы: