Fumex FF 100 Series, Руководство пользователя

Страница: 7 / 12

7
FUMEX FF 100
1
2
Manual
4 Preparation for use
4.1 Transport & storage
Protect the machine and its parts from rain,
snow, aggressive atmospheres and other
harmful effects.
4.2 Electrical equipment
Faults in the electrical system must be recti-
fied immediately.
Check all external wires as well as the power switch
and motor for visible external damage. Repair any da-
mage immediately.
4.3 Assembly & installation
National rules and regulations must always be adhered
to during assembly work.
4.3.1 Unpacking
1. Unpack the product carefully.
2. Check for any damage and missing parts. Contact
a local FUMEX representative directly if there is
damage or if parts are missing.
3. Dispose of the packaging material according to local
recycling regulations.
5 Commissioning
5.1 Start-up
Any detected faults must be rectified before
turning on the power.
1. Ensure that there are no loose items inside the fan.
2. Where applicable, connect the fan to the selected
accessory or ensure that it is securely mounted.
3. Connect the plug to the wall socket.
There may be a slight delay after power is
switched on.
4. Turn on the power switch.
5. Adjust the potentiometer to the desired level
between max and min to ensure that the impeller is
rotating without making any strange noises.
If the machine turns off automatically,
the power consumption is too high.
Please contact FUMEX.
6. Turn off the fan.
The fan is now ready for operation.
6 Operation
Note that electronic equipment is always
sensitive to static electricity, high humidity,
high temperature, and power grid disruption.
6.1 Control panel
See Fig. 3.
1. Power switch/Potentiometer
2. Power cord connector
The fan is turned on/off via the power switch (1). Regu-
lation of the fan’s rotation speed is adjusted using the
potentiometer (1).
Fig. 3