Assembly
Insert one of the Lifting Columns (either one; they’re identical) into one of the Frame
Ends (also the same) as shown below.
To secure the Frame End to the leg, thread four (4) of the Small Machine Screws
into the holes as shown, but do not tighten them all the way. Once all four screws
are in place, tighten completely.
Step 1
Step 2
Select the Right Side Bracket. The two tabs on the Side Bracket will slot into the
Frame End, around the Lifting Column.
Use two of the Medium Machine Screws to secure the Side Bracket. As before,
don’t tighten all the way until both screws are in place and then tighten completely.
4
Step 1 Assembly
A — Lifting Column x1
N — Small Machine
Screw x4
B — Frame End x1
E — Right Side Bracket
M — Medium Machine
Screw x2
