Page 3
Battery Hatch
: to access this, remove (by hand) the 2 rubber feet/screws and lift hatch
up and out of the way. It is recommended that you use an alkaline 9-volt battery to get
the maximum 3-6 hours usage out of this effect. Unlike with most Fuzzes and Wah’s, I
notice no difference in sound between the alkaline and carbon-zinc batteries.
Buffered/TrueBypass
DIP switch: can be accessed from this opening as well, and
there is a picture diagram on the back of the battery hatch showing the way to set it for
either
True Bypass
or
Buffered
Outputs.
True Bypass
: set to this if you want a pure, unencumbered Hi-impedance signal (when
unit is off) that won’t affect your other pedals. This mode
cannot be used for stereo
operation, as the
#2
output jack
is disconnected in this mode.
WARNING!
You MUST unplug the guitar from the input jack when switching the
Buffer/Bypass switch. Failure to do so will damage your pedal and void your warranty
.
Buffered Out
: use this if you are running in stereo, or if you have long cables running to
the amp, as our hi-fi Low impedance out drives those long cables and sounds very
natural, unlike other Buffered-out pedals. This mode can be used
for both mono and
stereo operation.
Specifications
Weight: 1.3 lbs.
Height: 1.75” (at highest point)
Width: 5.9” (as pedal sits in front of you, Left to Right)
Depth: 5.0” (front to back)
Input impedance: 240k ohms
Output impedance: 100k ohms
Power consumption: 15 ma. Power requirements: 9 volts DC
*Regulated 9.0VDC / Neg. Center pin adapter (included)
*9 volt battery included
Battery life expectancy: 2-3 hours w/ Carbon Zinc, 3-6 hours with Alkaline.
Housing: aluminum, thickness 90 mil. Bottom plate anodized, Top section painted
hammertone Green
Warranty:
This product is warrantied for 5 years from date of purchase to the
original owner. Warranty does not cover the Battery, damage due to misuse, or
modifications/repairs done by
anyone
other than Fulltone Musical Products Inc.
We will determine whether a repair is warranty or otherwise, and customer is to pay all
shipping costs whether warranty-related or not. Do NOT return pedal to store for
repairs, contact us at 3815 Beethoven St (Rear Building) LA CA 90066 before sending
anything, and always include a note with specified funds, info, and return address.
Fulltone Musical Products Inc. assumes no liability for any injuries or death resulting
from the use of this product by itself or in conjunction with other products.
2000 FMP Inc. All Rights Reserved
Use this setting for
TrueBypass
Use this setting for
Buffered Out