10
3
3
3
3
4
−
The pusher and chopper base can be separated for
cleaning. To do so, push the pusher locks on the underside
of the chopper base towards each other to release the pusher
from the chopper base (see
Fig. K
).
K
9
Cleaning t
h
e t
op
ra
c
k
To install the pusher , push the two buttons inward to draw
back the pivots and slide the Pusher in from underneath.
Release two buttons to lock-in the pusher .
How to prevent stains and remove stains:
Some types of fruit and vegetables such as carrots/beets may discolor or
stain the plastic and blade parts. This is normal and safe, it’s common issue
with plastic products of this nature. The best thing to do is to prevent it from
happening in the first place, as follows:
Spray some vegetable oil on the plastic parts (where the plastic may come
into contact with the vegetable). This will make it much harder for
carrots/beets to stain the plastic parts.
If stains happen, please try one of the 2 methods below to remove the stains:
The easier method: Use baking soda to clean the stain.
The most effective method: Mix a paste of baking soda and dish soap, scrub
it on the stain, let it sit for 20 minutes, scrub it again, and rinse it thoroughly.
Repeat as necessary until the stain is removed.