6
How to Assemble and Operate the Vacuum
Fig. 1
Fig. 2
How to Assemble and Operate the Vacuum
The vacuum, hose, wand and accessories are packed separately�
1� Push the hose cuff into the hose inlet on the top of the bag compartment
until it clicks into place (Fig� 1)�
2� Attach the electrical cord from the hose into the plug underneath the carry
handle (FB-HMP model only) (Fig� 2)�
How to Extend the Wand
Grasp the wand extension grip (FB-HMP model) or the wand extension
button (FB-HM model) and pull up on the hose handle to extend the wand to
the desired length�
On/Off Switch
1� To turn the vacuum on, push the power pedal on the top of the vacuum�
2� To turn the vacuum off, push the pedal again�
3� To turn the power nozzle on, turn the vacuum on first, then push the
On/Off switch on the hose handle to the “On” position
(FB-HMP model only)�
Full Bag Indicator
1� If the full bag indicator appears, change the vacuum bag�
2� If the full bag indicator appears, but the vacuum bag is not full, check the
hose for a clog�
NOTE: When cleaning with a tool (dusting brush, upholstery tool or crevice
tool), the full bag indicator may appear� In this case, continue
cleaning, as the indicator will likely go off once the tools are no
longer in use�
Variable Speed Control
To adjust the motor power, slide the variable speed control on the canister
body to the desired motor speed�
Suction Control
To adjust the suction level, slide the suction control switch on the handle to
reach the desired level of suction�
