Full Vision TRACK MASTER TMX428, Руководство пользователя

Страница: 40 / 83

Operating Instructions Ch.6 TRACKMASTER
38
TMX428 Owner’s Manual
317-160-284 Rev 6
February 2021
Pull Tether Switch
The pull tether switch is a safety device for patient safety use in emergency situations to stop the
treadmill.
CAUTION: Activation of the pull tether, the treadmill has a controlled deceleration rate of
2.5 MPH per second to 0.0 MPH and held at 0.0 MPH for 3 minutes or until
power cycle.
To re-attach the pull tether, attach clip to the original position on the switch. The treadmill will
return to 0.0% elevation.
Note: The pull tether clip needs to be seated for the treadmill to operate as designed .
Pull Tether Switch Check
NOTE: Verify proper operation of the pull tether switch assembly every month.

With the belt moving at a relatively high speed, pull the wrist strap to activate.
CAUTION: Activation of the pull tether, the treadmill has a controlled deceleration rate of
2.5 MPH per second to 0.0 MPH and held at 0.0 MPH for 3 minutes or until
power cycle.

The running belt will have resistance preventing the free movement of the running
surface. To reattach the pull tether, attach clip to the original position on the switch. The
treadmill will return to 0.0% elevation.

Use the controlling equipment to terminate the exercise session and turn off the treadmill.