5. INDICATIONS AND KEYS
6. INSTALLATION
7.
OPERATION MODES
2. APPLICATIONS
1. DESCRIPTION
3. TECHNICAL SPECIFICATIONS
4. DIMENSIONS
The
TCP-485 WiFi Log
converter is an interface for communicating Full Gauge Controls controllers with the
Sitrad management software. The
TCP-485 WiFi Log
uses a Wi-Fi or Ethernet data network to
Pro
communicate with the TCP/IP standard. Currently, many companies have wireless routers installed in their facilities,
as well as wired infrastructures, making it possible to use these same networks for data traffic between controllers
and
, using the
TCP-485 WiFi Log
converter.
Pro
Sitrad
This equipment has internal memory for data storage (datalogger), with the specific purpose of storing controller
logs when communication with
is unavailable.
Pro
Sitrad
Through the
, it is possible to select which instruments will have their logs
Pro
smartphone configuration app or Sitrad
registered and what is their periodicity. The logs registered in the equipment can be requested by
as soon as
Pro
Sitrad
the communication is reestablished, allowing its insertion in the supervisory database.
- Installations in which using the existing Wireless or Ethernet network is paramount;
- Installations that do not have conditions for passing new RS-485 data cabling and already have and Ethernet
structure installed.
Note
: The
TCP-485 WiFi Log
converter is designed to work with Full Gauge Controls instrument only.
Operating Temperature
0 to 50ºC / 32 to 122ºF
Operating Humidity
10 to 90% UR (without condensation)
32 (without the need for termination)
Converter power
External 5.1
2
Vdc / A source
Number of instruments supported per
converter on an RS-485 network
Wi-Fi antenna
3,8dBi for stable, high-quality connection
Internal memory
Antenna dimensions
8MB
194,5 x 12,8mm (LxD)
Wi-Fi compatibility
Encryption type
IEEE 802.11 b/g/n up to 72,2 Mbps
WEP, WPA and WPA2
Wi-Fi frequency
Ethernet (Lan Port)
2,4GHz band, channels 1 to 11
10 / 100 Mbps
Product dimensions (without antenna)
93,6 x 37,1 x 91,1 mm (WxHxD)
Power supply included with
the converter
Input - 100-240 Vac (50/60Hz)
Output: 5.1Vdc / 2A
91,1mm
37,1mm
Frontal view
Antenna
Side view
29,7mm
17,75mm
90°
85,7mm
93,6mm
12,8mm
164,8 mm
10
9
1
2
3
4 5
6
7
8
1
. POWER LED - Indication of power and operating mode
2
. STATUS LED - Indication of the connection status and signal strength
3
. TX LED - Indicates transmission over the RS-485 network
4
. RX LED - Indicates reception over the the RS-485 network
5
. DIN rail lock
6
. Power connector
7
. RS-485 network connector
8
. RJ-45 connector for ethenet cable
9
. RESET button - Switch between operating modes, or restore to factory default
settings
10
. Wi-Fi antenna
The
TCP-485 WiFi Log
converter should be preferably installed in places away from noise and
electromagnetic interference. It must be powered by the power supply provided with the device, if provided,
or a compatible one.
If the operating mode is Wi-Fi Client, the signal quality of the wireless network must be ensured. If the signal
is bad or very bad (see item 9), the communication may become unstable and there may be loss of
information. For recommendations on how to position the device to avoid interference, see item 13.
The RS-485 network must be connected following the recommendations in item 12.
The
TCP-485 WiFi Log
converter has two network interfaces: Ethernet and Wi-Fi, and three modes
of operation: Wi-Fi Access Point, Wi-Fi Client and Ethernet Client. Only one operation mode is enabled at a
time that is,
it is not possible to use the Ethernet and Wi-Fi interfaces at the same time.
7.1 Wi-Fi Access Point Mode:
In this mode, it operates as a Wi-Fi access point that accepts connection from only one client. This is the
factory default operating mode, which basically serves to configure the converter on first use, although it can
operate in this mode with a Sitrad client connected to it. The factory default SSID is
TCP-485 WIFI Log W-
Pro
XXXX E-YYYY
, with XXXX being the last 4 digits of the Wi-Fi MAC address and YYYY being the last 4 digits
of the Ethernet MAC address.
Example:
7.2
:
Wi-Fi Client Mode
In this mode, it operates as a Wi-Fi client and connects to the wireless network provided by the user.
Supports dynamic (DHCP) or static IP configuration. It accepts the connection of a Sitrad client and has an
Pro
IP filter to restrict access within the network.
7.3
:
Ethernet Client Mode
In this mode, it operates as an Ethernet client and connects to the wired network provided by the user.
Supports dynamic (DHCP) or static IP configuration. It accepts the connection of a Sitrad client and has an
Pro
IP filter to restrict access within the network.
Wi-Fi: F8: F0: 05: AD:
75: 56
Ethernet: F8: F0: 05: AD:
10: 54
SSID
TCP-485 WiFi Log
W7556 - E1054
The MAC address of the product’s network interfaces can be found on the label located on the front of the
case.
The default password is
admin123
V
er
.02
Have this manual in the palm
of your hand through the
FG Finder
app.
TCP485WIFILOGV02-03T
-17783
TCP-485 WiFi Log
SERIAL / WI-FI CONVERTER WITH DATALOGGER
Datalogger
Serial
Comunication
Supervisory
system
Wi-Fi
Ethernet
RS
485
LOG
BEFORE INSTALLING THE CONTROLLER, WE RECOMMEND THAT YOU READ THE INSTRUCTION MANUAL
COMPLETELY IN ORDER TO AVOID POSSIBLE DAMAGE TO THE PRODUCT.
“Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e
atende aos requisitos técnicos aplicados”.
“Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário”.
ANATEL
“This equipment is not entitled to protection against harmful interference and must not cause interference in duly
authorized systems."
“This product is not suitable for use in a domestic environment, as it may cause electromagnetic interference that requires
the user to take necessary measures to minimize these interference”
WARNING
PRODUCT INSTALLATION PRECAUTION:
- Before performing any procedure on this instrument, disconnect it from the power supply;
- Ensure that the instrument has proper ventilation, avoiding installing it on panels that contain other devices that can
cause it to operate outside the specified temperature limits;
- Install the product away from sources that may generate electromagnetic disturbances, such as: enginees, contactors,
relays, solenoids, etc.
AUTHORIZED SERVICE:
- The installation and maintenance of the product must be performed only by qualified personnel;
ACCESSORIES:
- Use only original Full Gauge Controls accessories.
- If in doubt, contact technical support.
AS IT IS CONSTANTLY EVOLVING, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE THE INFORMATION
CONTAINED IN THE MANUAL AT ANY TIME, WITHOUT PRIOR NOTICE.
