10
KNOW YOUR PRODUCT
Installing the wet cutting attachment
1.
Loosen the wing nut (20) and move the
base plate (22) down.
2.
Attach the wet cutting attachment (18) to
the tool using a screwdriver (not provided)
(fig. 3).
3.
Push fit to install the water tube (17) to the
water inlet (21) (fig. 4).
4.
Attach the water tap connector (16) to a
garden hose (not included); connected to
tap for water mains pressure. Push in fully
and secure with provided hose clamp (23)
(fig. 5).
Adjust the amount of water flow by simply
adjusting the water valve (19) and the tap.
Fig. 3
Fig. 4
SET-UP & PREPARATION (cont.)
WARNING!
Make sure that the included continuous rim diamond blade is
cooled with water during the complete cutting process.
23
16
Fig. 5
IMPORTANT!
The included continuous rim diamond blade is designed for
wet cutting only.
