8
Unpacking:
•
Open carton and remove top packing material.
•
Carefully lift the plasma cutter from the packaging and place it on a level work surface.
Note:
Use the carry handle (2) when lifting or moving the plasma cutter.
•
Unpack the contents.
Plasma Torch(4):
•
Attach torch lead connectors to the corresponding torch lead
sockets (6) on the front panel (Fig. 1).
Earth Clamp (12):
•
Attach earth lead connector (13) to earth lead socket (7) on the
front panel. Twist clockwise to tighten (Fig. 2).
Air Pressure Regulator:
The air pressure regulator is installed inside the unit, a Nitto® style
male quick release adaptor is mounted on the air pressure regulator
located on the rear of the plasma cutter.
•
Attach your compressor’s air supply hose to the male quick
release adaptor on the rear of the plasma cutter (Fig. 3)
ASSEMBLY
1
2
Fig. 2
Tighten
Fig. 1
Nitto®
style
Fig. 3
