14
SET UP & PREPARATION (cont.)
Loading fasteners
WARNING!
Always connect the tool to pressured air supply before
loading fasteners. Only use fasteners specified in the Specifications in this
manual can be used. Keep the tool pointed away from yourself and others
at all times. Do not load fasteners with the trigger (2) depressed.
1.
Grip the handle firmly with one hand and
with the other hand press down on the
cover latch to release the magazine cover
(fig. 3).
2.
Slide the magazine cover all
the way to the rear of the
magazine (fig. 4).
3.
Place the strip of fasteners into the magazine, be sure the fasteners are pointed
downwards and sit in the bottom of the magazine. Now push the magazine
cover forward and allow it to push the fasteners up to the driving mechanism
(fig. 5). Push the magazine
cover forward until it is
locked. The tool is ready for
use.
Note:
Up to 100 fasteners may
be loaded in the magazine.
Fig. 4
Fig. 5
Fig. 3
WARNING!
Do not carry tool with your finger on the trigger. Do not fire
the tool without fasteners in the magazine.
