-15-
Displayed Message
Description
Di gi ta l K ey pa d O pe ra ti on
Displays the internal counter value
Note:
Refer to Chapter 5, F1-45, 46, 63 - 66 for a detailed description
of the above.
(r).
Displays the output c urrent present at terminals U, V, and W
The display will read
(as shown) for approximately 1 second if
the input has been accepted. After a parameter value has been set,the
new value is auto matically stored in memory. To modify an entry, use
or
key.Then press the
key.
Fd
FUNC
DATA
Displays the specified parameter numb er. The actual parameter valu e
may be displayed by pressing the
key.
FUNC
DATA
Displays the AC drive output frequency controlled by the Maximum
Output Frequency (F1- 03), Jog Frequenc y (F1- 16), or by the
Multi-Function Input Terminals (F1-39-41).
If the frequency source originates from the Digital keypad, the user can
use either the
or
key to set the frequency.
Displays the output frequency present at terminals U, V, and W.
Displays the input voltage.
Displays the custom unit (n), where n = P * F1-.65.
Displays actual value stored within the specified parameter.
Press the
key to store the value of the specified parameter.
FUNC
DATA
DZB100 Series
3.2 Explanation of Screen Display
Explanation of Displayed Messages
