Page 2 of 2
2014-
Rev B
488
Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060.
Specifications subject to change without notice.
[email protected] www.fulham.com
GENERAL INSTALLATION
GUIDELINES FOR EMERGENCY
LIGHTING FIXTURE
(FHEM12 Series)
Unused wires must be capped using enclosed wire nuts.
WARNING:
1. During an electrical power failure, the lamps on the unit will automatically come ON for a minimum
of 90 minutes.
2. To test this unit, let it charge corectly with AC power supply for a minimum of 24 hours after its first
OPERATION
installation and then depress the “TEST” switch, the emergency lamps will illuminate. when the
switch is released, the lamps will turn OFF.
LED WIRING DIAGRAM
RED
120V
BLACK
RED
BLACK
RED
BLACK
LED LAMP LED LAMP
READY
TEST
BATTERY
3.6V/900maH
RED
BLACK
WHITE
277V
NEUTRAL
PCB
LED WIRING DIAGRAM:
MR16 WIRING DIAGRAM:
RED
120V
BLACK
RED
BLACK
RED
BLACK
MR16 6V 5W
MR16 6V 5W
READY
TEST
BATTERY
6V/4.5A
RED
BLACK
WHITE
277V
NEUTRAL
PCB
NOTE:
UNUSED LEAD TO BE PROPERLY INSULATED WITH WIRE NUT OR OTHER APPROVED METHOD
