Fulgor Milano FCLHD 9041 HID TS BK/2, Инструкция по установке, использованию и обслуживанию

Страница: 21 / 28

FINAL OPERATIONS
Open the hob glass and Install the two grease
filters in correspondence of its seat, making them
pass through the appropriate opening see fig. 9.
ELECTRICAL CONNECTIONS
The connection of the product to the power sup-
ply must be carried out in compliance with the in-
ternational and local regulations in force.
The interconnection of any separate part of this
appliance must be carried out by a qualified tech-
nician in compliance with the wiring regulations.
The connection to the power supply must be by
means of a plug and it can also be done by the
end user.
Any liability in case of accidents caused by failure
to arrange the earth connection or failure to ar-
range it correctly is hereby declined.
The controls located under the glass of the hob
have a cable, which must be connected to the
control box (Fig. 10).
EN
PRODUCT
INSTALLATION
Before any installation operation is carried out,
make sure that the appliance is disconnected from
power supply.
TECHNICAL OPERATIONS
Place the overturned hob on an adequate surface,
preserving the glass from any scratches. Take the
filtering box from the packaging and install it as
shown in fig. 1-2, making sure to match the pins
present with the appropriate slots (fig. 3-4).
Lock the filtering box to the hob using the 6 nuts
supplied (fig. 3-4) and 2 screws for the front part
(fig. 5).
Carry on the installation by securing the hob to the
cabinet, as shown in the specific user manual pro-
vided within the packaging of the hob.
IN CASE OF RECIRCULATING OPERATION
(Fig. 6)
The air outlet of the product must be connected
to the opening in the cabinet so as to recirculate
the exhausted air in the kitchen. It is necessary
to have charcoal filters (fig.8A) which can be pur-
chased separately, and install them as indicated
in (Fig. 8).
The charcoal filters have their seat immediately
under the grease filters (fig.8b), therefore,
it is necessary to open the glass of the hob and
install the carbon filters first and then the grease
filters. A ducting kit with grill (on the end to be in-
stalled in the cabinet) is also available for separate
purchase.
IN CASE OF DUCTING OPERATION (fig. 7)
The air outlet of the product must be connected to
the outside of the house. The ducting to be instal-
led from the air outlet of the product to the outside
of the house is not provided with the appliance.
The product is equipped with plastic flanges, to
connect ducts of sections 220x90 mm.
20