USA-CAN - 8
3. INSTALLATION
WARNING:
When installing the dishwasher, follow basic
precautions, including the following:
Please check the standards and local codes for placement of
machine.
• Installation, maintenance and repair should be performed by a
qualified installer. Work by unqualified persons could be dangerous
and may void the warranty.
• Do not operate the appliance if damaged, malfunctioning, partially
disassembled or if it has missing or broken parts.
• Before installation or service, disconnect the power supply to the
work area by unplugging the unit, “tripping” the circuit breaker or
removing the fuse.
• Only connect the dishwasher to the power supply when all
installation and plumbing work is complete.
• Never connect the ground wire to gas lines, or hot water pipes,
plumbing lines.
• Do not install or store the dishwasher where it can be exposed to
below freezing temperatures or exposed to weather.
• Dishwasher must be secured to adjacent cabinetry using the
brackets provided. Failure to do this may cause damage to property
or bodily injury.
• Connect to a properly rated, protected and sized power supply
circuit to avoid electrical overload. The dishwasher is designed for
an electrical supply of 120 V (volts), 60 Hz (hertz),
AC, connected to a dishwasher dedicated, properly grounded
electrical circuit with a fuse or breakers rated for 15 amperes.
Electrical supply conductors shall be a minimum of # 16 AWG
copper wire rated at 75 °C (167 °F) or higher. These requirements
must be met to prevent injury and machine damage. Consult a
qualified electrician if in doubt.
• Do not use any extension cord or portable outlet device to connect
the dishwasher to a power supply.
WARNING:
Danger of suffocation! Ensure that any plastic
wrappings, bags, small pieces etc. are disposed of safely and kept
out of the reach of children.
Содержание F4DWS24SS1
