Fulcrum Torbal DRX-4, Инструкция по эксплуатации

Страница: 24 / 30

Setting the Time and Date
1. Turn the scale on by pressing the power key ( ). The scale will then begin
its initialization procedure. The display will indicate C-1, C-2, C-3, C-4, C-5,
and C-6. During the last initialization segment the display will indicate the
software version of the scale: NA025. While the software version is
displayed, press the “P” key to enter the time and date settings.
2. The scale will then display commands Set-t-0, and Set-t-1 appearing
sequentially approximately every 2 seconds. To change the date and time,
press the “T” key while command Set-t-1 is displayed. If you want to cancel
the operation, press the T key while Set-t-0 is displayed.
3.
Upon pressing the T key while Set-t-1 is displayed, the scale will allow you to
change the time.
C H A P T E R 1 3
19
4. The current time setting will be displayed.
:
Time: PM 1 29
Display indicating the current
time is 1:29 p.m.
I n s t r u c t i o n M a n u a l M o d e l D R X - 4