- 17 -
Instruction Manual – ATS / BTS Moisture Analyzers
5.
Close the Drying Chamber.
6.
Press the START key. The unit will indicate on the display that Heating is in progress. The moisture content of the
sample will be displayed as a percentage (%). During the analysis, in addition to the result, the display will indicate the
Drying Chamber Temperature, the present weight of the sample, the elapsed time, and the initial weight of the sample.
Important Caution Note:
Do not touch the top surfaces of the Moisture Analyzer’s Drying Chamber or any internal parts
either during or soon after use. As the parts and surfaces will be very HOT, allow adequate time for the unit to cool. Be
sure to read and follow all Caution Procedures listed in Chapter 1.
7.
When the analysis is finished, “END” will be displayed in the lower right corner of the LCD. The Final result will
remain displayed. To clear the result and prepare the unit for the next analysis, press the key STOP.
Important Note
: Always use the forceps supplied with the unit when handling a used Disposable Pan.
