5. Driver installation
The printer CD has Windows driver procedure, the position is:
Drivers\Windows File.
Right click"Driver setup.exe",and run as administer.( (Double click to
run in XP system,and it needs administrator to run in WIN7/WIN8).
Choose language as "Enclish" click "next",and choose printer to
connect PC port click "next".
Then it will show"Printer was created successfully"
5. Driver installation
DIP switch
Switch
Function
On
Off
Default
Buzzer
Printing density
Multi-byte encoding
Max. number of Printing
characters in each line
Cash drawer
Baud rate options (bps)
Cutter
Single-byte
encoding
Chart 1 Baud rate options
Forbidden
Enable
Dark
42
Enable
Enable
Forbidden
multi-byte
encoding
Light
48
Forbidden
Ref. Chart 1
Off
On
Off
Off
Off
On
Off
Off
Baud rate
Switch 7
Switch 8
Default
Off
On
On
Off
Off
Off
On
On
7. IP address setting
8. Fix the Paper Jam
Take off the cutter adjusting cover
in vertical direction as photo.
Adjust paper-cutter to make
the cutter set back to print
mechanism completely as
photo direction
Open paper cover and
eliminate paper jam.
Install cutter adjusting cover
vertically down.
Re-loading paper, close the
paper cover and then power on.
Cover of Cutter
Cutter's adjuster
9. Content in the package
Paper roll
Communication cable
CD
Printer
Power supplier
Power cord
Quick
and Use Guide
(USB;serial; parallel optional)
Turn on the
printer power
switch
Insert the CD
into your
computer's
CD-ROM
drive
Please check the parts when opening the box,if ther is something missed,please
contact with the supplier or the manufacturer.
Shanghai Fukun Electronics Co.,Ltd
Web:www.fukun-tech.com
5
4
The printer's Ethernet IP address can be set directly via printer inserted web
setting page.
Connect printer and PC in a same Ethernet LAN.
Please visite address "http://printer 192.168.1.87" (e.g.: the"192.168.1.87",
is factory IP address), then press Enter key, open Ethernet port setting
page in browser as below:
3
Click "Configure Interface" link in the left side, then enter the modified
target IP and click "save" button to save setting. Click "Reboot" button
to reset printer if you want the setting to take effect.
Installation
Quick installation
and Use
Guide
FK80 Printer Driver Install
Chinese
English
Welcome
Next
Prev
Next
FK80 Printer Driver Install
Welcome
A serial port-use a serial port cable,connect the printer to your computer
If you want to know the printer's current settings and parameters, Please
click “ Printer Test Page” button to print self-test page, and check the IP
Address contents in the self-test page is right or not.
Warning: Do not open the paper roll warehouse cover forcibly
when you cannot open it normally if it is paper jam, which to
avoid damaging the printer.
!
Cable network-use cable connect the printer to your network
USB -use USB cable to connect the printer to your computer
FK80 Printer Driver Install
Welcome
Next
Prev
Cable network-use cable connect the printer to your network
USB -use USB cable to connect the printer to your computer
A serial port-use a serial port cable,connect the printer to your computer
Parallel port-use parallel cable to connect the printer to your computer
Open
Run as administrator
Finish
