CARE & MAINTENANCE
27
Protecting The FRE-205 Kit
●
The Fukuda FRE-205 is precision levelling equipment and should be treated as such. Always
handle with care and transport within the carry case provided.
●
Always turn the laser level off when transporting or moving around the job site.
●
Ensure the laser & accessories are clean and dry before storing in the case.
●
If wet, dry well before storing and store the case and contents at room temperature. Failure
to do so may void warranty.
●
NEVER store the Fukuda FRE-205 Kit in a van, car or an unheated location (workshop / shed
/ garage / lockup etc.) overnight. The Fukuda FRE-205 Kit is designed to work in cold and
wet conditions but it’s the storage of the product when not in use that is critical. Keeping
it in a secure heated building increases the usable life of the product and reduces the
possibility of theft.
●
When the laser level is not in use or is being stored long term, it is highly recommended to
remove the battery pack from the base of the laser as well as the batteries in the remote
control and detector.
●
Ensure the protective lighthouse glass is clean and free of dust and dirt at all times.
●
Only use the supplied charger with the laser. The 5.6 Volt UK Plug, 700mA charger (Input 100-
240V AC 50/60Hz Output DC 5.6V 700mA, centre pin + polarity) is for indoor use only. If the
charger becomes damaged, stop using immediately and purchase a replacement.
Never use
a generic charger with this laser.
●
Always check the accuracy of the laser level before precision levelling is attempted. Failure to
do so may result in inaccurate levels. See page
22
for further details.
●
If the FRE-205 has received a heavy impact or has been dropped, please ensure the
calibration is checked.
●
There are no user serviceable parts inside the FRE-205. Warranty void if tampered.
