Fujitsu X23T-1 MHL, Руководство по эксплуатации

Страница: 26 / 42

Operation
Changing the monitor settings
When putting the monitor into operation for the fi rst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. When the OSD menu is
active, the current meaning of the buttons is shown directly over the buttons
on the edge of the screen (softkeys). With the OSD menu not activated,
you can make the following settings directly:
1 2 3
INPUT
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF button
3 = Power supply indicator
Select OSD language
After the fi rst power-on of the monitor, the selection screen for the language is displayed:
► Press the / or the INPUT button to select the required language.
► Press the
MENU
/ button to con fi rm your entries.
After selecting the OSD language for the fi rst time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor (for VGA input only)
► Press the AUTO button for about 1 second.
The
Auto Processing
message appears
Picture quality and position are set to optimum values for your system.
22 Fujitsu