Page 7 of 8
_
8. Switch operations
_
The unit has 2 Switch
Setup Switch
Contents
10 seconds push
(Hold until LED 3 blinks rapidly)
Stored W-LAN network configuration reset.
System will after next restart connect to EcoSmart network if found.
Reset Switch
Contents
Short push
Restart the device and enter W-LAN and outdoor unit configuration mode.
Safe mode
Contents
Hold down both Reset and Setup
switches until magenta LED3
Used to force the unit to connect to cloud without starting user application.
_
9. Startup and Test Run
_
Please confirm that the entire system including external device operates normally.
(If only the outdoor unit operates, it may cause damage to the entire refrigerant system.)
Before turning on power for the first time please double check all wiring to avoid damage to unit and/or external equipment.
1. Turn on power.
2. Connect to unit W-LAN EcoSmart_xxxx using your smartphone, tablet, PC, or MAC.
3. Open web browser and go to unit website 192.168.0.1
4. Note down 6 the digit alphanumeric device code.
5. Follow the instructions to configure W-LAN connection and select outdoor unit and refrigerant type.
6. Go to https://ecosmart.cloud and make account and claim the device using 6-digit alphanumeric device code.
Reading of status, setting of parameters and simulation of demand may be done from https://ecosmart.cloud
※
If you want to know system status, please chec
k 3 LED’s(Reference Contents 7)
CAUTION
If it makes mistake to choose the outdoor unit and refrigerant type, it causes the damage and trouble for the outdoor unit.
Please make sure to check the connecting outdoor unit model and choose the proper outdoor unit type on website.
Operation environment (Personal computer environment)
Items
Contents
CPU
2GHz or higher
Memory
2GB or more
HDD
10GB or more of free space
Display
1366 x 768 or higher resolution
Interface
Ethernet port (Ethernet port is required for remote connection using internet.)
Or Wireless LAN port
OS
Windows 10
Browser
Internet explorer 11 / Google Chrome ver.75
_
10. Check List (Example)
_
Pay special attention to the check item below when installing the entire system.
After installation is complete, be sure to check the following check item again.
Check items
If not performed correctly
Check box
Does temperature sensor detect proper temperature with
operation?
No operation, heat or burn damage
No cooling, No heating
Are the wirings between each device correct?
No operation, heat or burn damage
Are the installed outdoor unit and the selection of outdoor
unit by webpage matched?
No operation, heat or burn damage
No cooling, No heating
Are the external device and DX-kit operating as expected?
No operation, heat or burn damage
Has the AHU of 3rd party been installed correctly?
Vibration, noise, indoor unit may drop
Has there been a check for F-gas leakage (refrigerant pipes)?
No cooling, No heating
