En-4
(1) Replace the control box cover (2 screws).
Screw
Screw
(2) Open a hole in the front panel for the remote
controller cable to pass through.
*
Choose from 4 knockout holes marked on the
inside of the front panel.
(3) Replace the front cover.
First, insert the hook on the lower part of the front
panel (5 places), then fit the hooks on the top
(3 places).
(4) Replace the 10 screws.
(5) Replace the wire cover (1 screw).
(6) Replace the 4 caps.
(7) Replace the intake grille.
Front panel
Top hooks
(3 places)
Top holes (3 places)
Indoor unit
Middle hooks
(5 places)
Middle hooks
(5 places)
c
Press down on 4 places.
Intake grill installation
Cut
Knockout holes
Knockout holes
Front panel
3.5. Front panel, control box cover replacement
Reinstall by reversing the procedure in “3.1. Front panel, control box cover removal”
3.4. Installing the communication PCB to the indoor unit main PCB
(1) Attach the holders (accessories) to the indoor unit main PCB.
Hole to insert holder.
Holders (accessories)
(2) Insert the communication PCB between the holders. Be sure to insert it firmly.
Insert connector
fi
rmly.
9380828068_IM_EN.indd 4
9380828068_IM_EN.indd 4
11/11/2015 1:30:35 PM
11/11/2015 1:30:35 PM
