En-1
AIR CONDITIONER
OPTIONAL PARTS
Terminal block kit for 2-wire remote controller
INSTALLATION MANUAL
For authorized service personnel only.
PART No. 9380828068
1. SAFETY PRECAUTIONS
• Hand this manual to the customer to keep for future use, such as for relocating or repairing the product.
WARNING
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or
serious injury.
For the air conditioner to operate satisfactorily, install it as outlined in this installation manual.
Installation work must be performed in accordance with national wiring standards by authorized personnel only.
Do not turn on the power until all installation work is complete.
Discharge static electricity before the installation.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate injury or damage to
property.
Do not wire the terminal block kit wire together with or parallel to the connection cables, transmission cables, remote controller
cables, bus wire, and power supply cables of the indoor and outdoor units. It may cause erroneous operation.
Do not touch the aluminum
fi
n in the indoor unit.
When installing, do not cut or pinch the wires with the front panel or control box cover. An electric shock may occur if wires are damaged.
2. ABOUT THE UNIT
2.1. Parts and accessories
• The following installation parts are supplied. Use them as required.
Name and shape
Q'ty
Description
Installation
manual
1
This manual
Terminal block
(with wire)
1
For connecting the
wired remote control
unit to the indoor unit
main PCB.
Screw (M4x25)
1
For installing the terminal
block to the indoor unit.
Name and shape
Q'ty
Description
Screw (M4x14)
1
For installing the cable
to the indoor unit.
Cable clamper
1
For installing the cable
to the indoor unit.
Communication PCB
1
For connecting the
remote controller to the
indoor unit.
Holder
2
For attaching the
communication PCB to
the main PCB.
Contents
1. SAFETY
PRECAUTIONS
............................................................................................................................................................ 1
2. ABOUT
THE
UNIT
2.1. Parts and accessories ........................................................................................................................................................... 1
3. INSTALLATION
WORK
3.1. Front panel, control box cover removal ................................................................................................................................. 2
3.2. Installing the terminal block ................................................................................................................................................... 2
3.3. Connecting the remote controller cable ................................................................................................................................ 3
3.4. Installing the communication PCB to the indoor unit main PCB ........................................................................................... 4
3.5. Front panel, control box cover replacement .......................................................................................................................... 4
9380828068_IM_EN.indd 1
9380828068_IM_EN.indd 1
11/11/2015 1:30:34 PM
11/11/2015 1:30:34 PM
