En-10
Setting
SW No.
SW setting
Function
Mode
SW104-1
ON
Mode1
OFF output
SW104-2
OFF
Disabled
Polarity
SW104-3
ON
OFF
→
ON SCENE1
ON
→
OFF SCENE2
SW104-4
OFF
ON
→
OFF SCENE3
OFF
→
ON SCENE4
CH2 setting
EXIN
0
Operation stop
OFF TIMER
SW103
2
Stop after 3 hours
SCENE
Setting
SW No.
SW setting
Function
SCENE1
Operation stop
SW107-1/2
OFF/ON
Operation
Fan speed
SW107-3/4
OFF/OFF
No change
Operation mode SW108-1/2
ON/ON
No change 2
All operation
SW108-3/4
OFF/OFF
No change
Set temperature
1
SW111-
1/2/3/4
ON/ON/
OFF/ON
26°C (80°F)
Set temperature
2
SW112-
1/2/3/4
ON/OFF/
ON/OFF
20°C (68°F)
SCENE2
Operation stop
SW105-1/2
OFF/OFF
No change
Fan speed
SW105-3/4
OFF/OFF
No change
Operation mode SW106-1/2
ON/ON
No change 2
All operation
SW106-3/4
OFF/OFF
No change
Set temperature
1
SW109-
1/2/3/4
ON/ON/
ON/ON
30°C (88°F)
Set temperature
2
SW110-
1/2/3/4
ON/OFF/
OFF/OFF
16°C (60°F)
12. TURNING ON THE POWER
(1) Check this product wiring and switch settings on the circuit board.
(2) Check the wiring and switch settings for the VRF system or multi
system or single model. For the wiring and switch settings method,
refer to the installation instruction sheet of each unit.
(3) Turn on the power for the VRF system or multi system or single
model.
(4) Power will be supplied from the system to the convertor.
▪
This product will be initialized and the power turned on.
LED1 (green) and LED2 (orange) will
fl
ash.
▪
After initial setting is completed, operation will be restarted auto-
matically.
LED1 (green) lights.
▪
This product does not operate during initialization.
* An error code will appear on LED in the event of a malfunction.
13. LED DISPLAY
13. 1.
Normal code
Normal indications
Normal contents
LED1
(green)
LED2
(orange)
LED3
(red)
During initialization (during initializa-
tion sequence)
Normally operating
Display mode
: On
: Off
: Flashing
13. 2.
Error code
When error occurs in the remote controller connected to the Network
convertor, please refer to the installation manual of the remote controller
and indoor unit.
Error indications
Error contents
LED1
(green)
LED2
(orange)
LED3
(red)
(1)
(2)
Remote controller communication
error
(1)
(5)
Scan error
(2)
(6)
Indoor unit address setting error
(11)
(2)
Peripheral unit transmission PCB er-
ror
Display mode
: 0.5s ON / 0.5s OFF
: 0.1s ON / 0.1s OFF
( ) : Number of flashing
• Switch location map
9374707157-02_IM.indb 10
9374707157-02_IM.indb 10
12/2/2016 5:22:46 PM
12/2/2016 5:22:46 PM
