En-14
Notice
• When “10 °C Heat” is set to “On” at the operating
indoor unit, the operation stops and starts the 10 °C
heat operation. (“On-Off” turns to “Off”).
• When “On-Off” is set to “On” after “10 °C Heat” is set
to “On”, 10 °C heat operation stops. (“10 °C Heat”
turns to “Off”).
• While indoor units other than selected one are under
Cool or Dry operation, 10 °C heat setting is not
displayed. (It cannot set up.)
2
Other operation setting items can be set continuously.
To complete the setting, press the [Enter button], then it
returns to the “Operation (unit select)” screen.
6-3-6. Economy setting
1
Select “Economy” with the [Cursor button (Left/Right)]
and set “On” with the [Cursor button (Up/Down)].
Mo 10:00AM
Operation
Room 1
On-Off/Mode/Set temp.
Cancel:
OK:
Fan
High
Economy
10 °C Heat
Off
On
Notice
• While “Economy (All)” is set to “Enable” in function
setting, Economy cannot be turned to “Off” by the
operation setting or the standard remote controller.
If necessary, set “Economy (All)” to “Disable” in
function setting.
• When in the 10 °C heat operation, Economy setting
is not displayed (It is not possible to set it).
2
Other operation setting items can be set continuously.
To complete the setting, press the [Enter button], then it
returns to the “Operation (unit select)” screen.
7. FUNCTION SETTING
1
1
7-1. About the Function setting
Functions relating to the operation can be set. Available set-
tings or operations are as follows:
10 °C heat (All) setting
Enable or disable 10 °C heat (All) can be set. If set to en-
able, all indoor units start the 10 °C heat operation which
is stopped by pressing the [On/Off button] on the Central
remote controller.
Refer to [7-3-1. 10 °C heat (All) setting].
If each indoor unit is set to 10 °C heat operation, set ac-
cording to the instructions in [6. OPERATION SETTING].
Economy (All) setting
Enable or disable Economy (All) can be set. If set to ena-
ble, all indoor and outdoor units operate in economy ope-
ration mode.
Refer to [7-3-2. Economy (All) setting]
If each indoor unit is set to economy operation, follow the
instructions in [6. OPERATION SETTING].
Outdoor unit low noise operation setting
Enable or disable of the low noise operation of the outdoor
unit and the period of time can be set. If set to enable, the
outdoor units operate in the low noise operation mode dur-
ing the set period of time.
Refer to [7-3-3. Outdoor unit low noise operation setting].
Schedule select
Selecting schedule pattern when the schedule timer opera-
tion is applied and the days of the week can be set when
the schedule timer operation is not applied temporarily.
Refer to [7-3-4. Schedule select].
Pre-setting of schedule pattern is required. To set the
schedule pattern, follow the instructions in [8. SCHEDULE
SETTING].
1
1
7-2. Switching to the “Function” screen
1
If “Function” is selected with the [Cursor button (Left/
right)] from the Monitor screen menu, and [Enter
button] is pressed, “Function” screen is displayed.
Mo 10:00AM
Off
Menu
Schedule
Monitor
Room 1
Room 4
Room 2
Room 3
Room 5
Room 6
Room 7
Room 8
Operation
Function
2
Proceed to [7-3. Function setting].
9380221012-03_OM_en.indd 14
9380221012-03_OM_en.indd 14
30/11/2553 15:25:02
30/11/2553 15:25:02
