En-3
PREPARATORY OPERATION
To set the operation mode
OPERATION
●
It is possible to make the operation settings for all indoor units or individual units.
To start/stop operation
Hold down the PROGRAM (CLOCK ADJUST) button for 2
seconds or more.
2
Press the DAY button and select the
current day.
A
appears around the selected
day.
Press the Set Time buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.
ex. Monday 10:00 (24-hour display)
Press again the PROGRAM (CLOCK
ADJUST) button to end.
CLOCK ADJUST
1
3
4
Press the ALL ON button or the ALL OFF button to turn on or off all registered indoor units.
Press the Master Control button to set the operation mode.
To set the current day and time
●
Operation mode setting
AUTO
COOL
DRY
FAN
HEAT
CLOCK ADJUST
DAY
S M T W T F S
SUN
MON
TUE
WED
THU
FRI
SAT
Reverse Advance
ALL
ON
ALL
OFF
* With cover closed
Press the ON/OFF button for the corresponding indoor unit.
* With cover open
Press the Start/Stop button for selected indoor unit(s).
ON
OFF
Temperature setting range
AUTO ............................................................ 18 to 30 °C
COOL/DRY .................................................... 18 to 30 °C
HEAT ............................................................. 10 to 30 °C
Raise
Press the Set Temperature buttons to set the room temperature.
●
Room temperature setting
* AUTO and FAN cannot be selected for “HEAT PUMP MODELS.”
* HEAT cannot be selected for “COOLING ONLY MODELS.”
Lower
Press the Fan Control button to set the fan speed.
* According to the initial setting, the heating temperature range from 10 to 15 °C
cannot be set. In addition, the temperature range from 10 to 15 °C is invalid de-
pending on the model even if it can be set.
●
Fan speed setting
AUTO
HIGH
MED
LOW
* If DRY is selected, the fan speed can be set to AUTO only.