Fujitsu STYLISTIC Q736, Руководство по эксплуатации

Страница: 120 / 133

Appendix
Problem Possible Cause Possible Solution
The WLAN device was
deactivated or is disabled Check if the wireless switch
is turned On. Go to
Start >
Control Panel , and doubleclick
on Windows Mobility Center . If
the wireless network is off, click
the
Turn wireless on button.
The computer to be connected
is turned off Check if the computer to be
connected is turned ON.
Incorrectly con fi gured network
settings
Recheck the con fi guration of
your network settings.
RF interference from Access
Points or other wireless
networks The use of identical or
overlapping RF channels can
cause interference with the
operation of the WLAN device.
Change the channel of your
Access Point to a channel
that does not overlap with the
interfering device.
Wireless network authentication
has failed Re-check your Network
Authentication, Encryption,
and Security settings.
Incorrectly con
fi gured
security settings such as
an incorrectly typed WEP
key, a mis-con
fi gured LEAP
username, or an incorrectly
chosen authentication method
will cause the LAN device to
associate but not authenticate
to the wireless network.
Unavailable network connection
(continued)
Incorrect IP address
con
fi guration
This only applies to networks
using static IP addresses.
Please contact your network
administrator for the correct
settings.
Image Backup and Recovery Procedures
The following instructions cover separate Backup and Recovery Procedures for Windows®
7 and Backup and Recovery Procedures for Windows 10. Please follow instructions
that are applicable to your system’s operating system.
Windows® 7 Procedures
It is very important that you create DVD copies of your Recovery Image and
Bootable Disc before beginning to use your system.
118 Fujitsu