24
- Switching the wireless components on and off
Removing a memory card
Switching the wireless components on and off
WLAN and Bluetooth
1
Select
Settings
.
2
Set the switch for WLAN or Bluetooth to ON.
3
Click on WLAN and select your preferred network.
4
Click on
Bluetooth
and select the Bluetooth device with which you would like to connect your tablet.
GPS
Your device is equipped with an integrated GPS module. With the aid of suitable software, you can therefore use
your device as a navigation system.
It is very important that the correct procedure be used for removing
the memory card. Failure to do so could result in data loss.
To remove a MicroSD card, you must log the memory card out of the
system before you can remove it. Proceed as follows:
1
Select
Settings > Memory
. In
Memory
, all the memory components
are displayed.
2
Select
Remove SD card
.
3
Confirm the message with
OK
.
The memory card is logged out.
4
Press the memory card slightly inwards so that the catch
disengages.
5
Pull the memory card out of the slot (Figure 10, #1).
6
Replace the slot cover (Figure 10, #2)10
Figure 10. Removing a MicroSD Card
1
2
