manualshive.com logo in svg
background image

C o p y r i g h t

Fujitsu PC Corporation has made every effort to ensure 
the accuracy and completeness of this document; 
however, because ongoing development efforts are made 
to continually improve the capabilities of our products, 
we cannot guarantee the accuracy of the contents of this 
document. We disclaim liability for errors, omissions, or 
future changes herein.

Fujitsu and the Fujitsu logo are registered trademarks of 
Fujitsu Limited; Stylistic is a registered trademark of 
Fujitsu PC Corporation.

Kensington and MicroSaver are registered trademarks of 
the Kensington Technology Group.

Microsoft is a registered trademark of Microsoft 
Corporation. Windows 2000 Professional and Windows 
XP Professional are trademarks of Microsoft 
Corporation. 

PCMCIA and CardBus are registered trademarks of the 
Personal Computer Memory Card International 
Association.

Intel, Pentium, and SpeedStep are registered trademarks 
of Intel Corporation.

Wi-Fi is a trademark of the Wireless Ethernet 
Compatibility Alliance (WECA).

All other products are trademarks or registered 
trademarks of their respective companies. 

Copyright 2002 - Fujitsu PC Corporation. All rights 
reserved. No part of this publication may be copied, 
reproduced, or translated, without the prior written 
consent of Fujitsu PC Corporation. No part of this 
publication may be stored or transmitted in any 
electronic form without the prior consent of Fujitsu PC 
Corporation

 

FPC58-0714-02

 

Note:

For more detailed information about the FCC rules and their applicability to the Stylistic 
ST4000P Series pen tablet PC, refer to Chapter 5 of this document.

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name:

Fujitsu PC Corporation

Address:

5200 Patrick Henry Drive
Santa Clara, CA 95054

Telephone:

408-982-9500

Declares that product:

Model Series: Stylistic® ST4000P
Complies with Part 15 of the FCC Rules

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and, (2) This device must accept any interference 
received, including interference that may cause undesired operation.

Alb_UG.book  Page i  Friday, November 1, 2002  4:22 PM

Содержание Stylistic 4110P











































































Отзывы: