70
SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
▼
To Select a Boot Device
●
At the
ok
prompt, type:
where the
device-specifier
is one of the following:
■
cdrom
– Specifies the DVD drive
■
disk
– Specifies the system boot disk (internal disk 0 by default)
■
disk0
– Specifies internal drive 0
■
disk1
– Specifies internal drive 1
■
disk2
– Specifies internal drive 2
■
disk3
– Specifies internal drive 3
■
net
,
net0
,
net1, net2, net3
– Specifies the network interfaces
■
full path name
– Specifies the device or network interface by its full path name
Note –
The Solaris OS modifies the
boot-device
variable to its full path name, not
the alias name. If you choose a nondefault
boot-device
variable, the Solaris OS
specifies the full device path of the boot device.
Note –
You can specify the name of the program to be booted as well as the way the
boot program operates. For more information, refer to the
OpenBoot 4.x Command
Reference Manual
for your specific Solaris OS release.
If you want to specify a network interface other than an on-board Ethernet
interface as the default boot device, you can determine the full path name of each
interface by typing either of the following commands:
The
show-devs
command lists the system devices and displays the full path
name of each PCI device.
Related Information
■
OpenBoot 4.x Command Reference Manual
ok
setenv boot-device
device-specifier
ok
show-devs
ok
show-nets
Содержание SPARC Enterprise T5140
