Fujitsu SPARC Enterprise T5140, Руководство по установке

Страница: 50 / 130

28 SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
3. Slide the chassis into the rack.
Caution – Before continuing, verify that the server is securely mounted in the rack,
and that the slide rails are locked to the mounting brackets.
Related Information
■
“Installing the Cable Management Arm for Both Servers” on page 29
Installing the Cable Management Arm
for Both Servers
The rackmounting kit for each server comes with the same cable management arm
(CMA) assembly. The CMA installation and cable management procedures are the
same for both servers.
Note –
The CMA includes velcro straps to secure the cables inside the CMA. Do not
install the velcro straps until you install the CMA, connect the cables, and place the
cabling inside the CMA as described in the following procedures.
Related Information
■
“Cable Management Notes for Both Servers” on page 18
■
“To Install the Cable Management Arm” on page 29
▼
To Install the Cable Management Arm
Caution – Support the CMA during this installation. Do not allow the assembly to
hang by its own weight until it is secured by all three attachment points.
1. Remove the tape from the CMA rail extension (on the left of the CMA) and
remove the CMA rail extension.