Fujitsu SPARC Enterprise T5120, Примечания к продукту

Страница: 128 / 150

116 SPARC Enterprise T5120 and T5220 Servers Product Notes • April 2010
Solaris OS Issues
TABLE A-4 lists the Solaris OS issues that have been fixed.
TABLE A-4
Fixed Solaris OS Issues
CR Description Workaround
6243759
(6479347) The Solaris
prtdiag
command displays device
paths incorrectly for
e1000g
driver devices.
Note - Fixed in the Solaris 10 5/08 OS (and
later) and in the Solaris 10 8/07 OS with patch
ID 127127-11 or later installed.
Force load all instances of the
e1000g
driver
and then restart the
picld
daemon as follows:
# devfsadm -i e1000g
# svcadm restart svc:/system/picl
Another workaround is to use the
-r
option
when booting or rebooting the system.
You can also upgrade the OS or install the patch
to avoid encountering this issue.
6527622 After the OS panic, the server may display the
following message and stop at the ok prompt.
WARNING: promif_ldom_setprop: ds
response timeout
WARNING: unable to store boot command
for use on reboot
Note - Fixed in Solaris patch ID 127111-05 or
later.
Set
auto-boot?=true
or use the
boot
command to start the server manually.
6536482 Currently,
cpummem
does not diagnose the
fbr/fbu
errors.
Note - Fixed in Solaris patch ID 127127-11 or
later.
6552999 Performing a Control-C while the
prtdiag -v
command is running causes blank
environmental data fields when run again.
The missing output is persistent until the picld
SMF service is restarted.
Note - Fixed in the Solaris 10 10/08 OS or by
installing patch ID 13094-01 or later.
If the environmental data is missing from the
prtdiag
output, restart the
picld
SMF service
in the control domain with the following
command:
#
svcadm restart picl
You can also upgrade the OS or install the patch
to avoid encountering this issue.