Fujitsu SPARC Enterprise T2000, Руководство по обслуживанию, Страница: 165 / 174

Appendix A Field-Replaceable Units A-5
5 DIMMs Section 5.2.3,
“Removing
DIMMs” on
page 5-12 Can be ordered in the following sizes:
• 512 MB
• 1 GB
• 2 GB
• 4 GB See
TABLE 5-1
in
Chapter 5 .
6 Power
distribution
board Section 5.2.9,
“Removing the
Power Distribution
Board” on page 5-27 Provides the main 12V power interconnect
between the power supplies and the other
boards. PDB
7 Cable
management
kit Cable replacement
instructions are
provided in the
corresponding FRU
procedures. Includes the following: bus bars, hard disk drive
cable, motherboard I/O cable, PDB-I/O cable,
PDB-DVD cable, front I/O board cable n/a
8 Power supply
units (PS) Section 4.3.1,
“Removing a Power
Supply” on page 4-4 The power supplies provide -3.3 Vdc standby
power at 3 Amps and 12 Vdc at 25 Amps.
When facing the rear of the system, PS0 is on the
left and PS1 is on the right. PS0
PS1
9 Rear blower Section 4.4.1,
“Removing the Rear
Blower” on page 4-7 Blower. FT2
10 LED board Section 5.2.11,
“Removing the LED
Board” on page 5-32 Contains the push-button circuitry and LEDs that
are displayed on the front bezel of the chassis. LEDBD
11 Front I/O
board Section 5.2.15,
“Removing the
Front I/O Board”
on page 5-35 Front I/O board. FIOBD
12 Fan power
board Section 5.2.13,
“Removing the Fan
Power Board” on
page 5-34 Houses the connectors and three amber LEDs for
the fan assemblies. FANBD
13 Fans Section 4.2.1,
“Removing a Fan”
on page 4-2
Fans 0, 1, and 2.
FT0/FM0
FT0/FM1
FT0/FM2
TABLE A-1
Server FRU List (Continued)
Item No. FRU
Replacement
Instructions
Description FRU Name
*