Fujitsu SPARC Enterprise T2000, Руководство администратора, Страница: 47 / 98

Chapter 1 Configuring the System Console 25
▼
To Obtain the
ok
Prompt
1. Decide which method you need to use to reach the
ok
prompt.
See “OpenBoot
ok
Prompt” on page 21 for details.
2. Follow the appropriate instructions in
TABLE 1-3
.
TABLE 1-3
Ways of Accessing the
ok
Prompt
Access Method What to Do
Graceful shutdown of
the Solaris OS From a shell or command tool window, issue an appropriate
command (for example, the
shutdown
or
init
command) as
described in Solaris system administration documentation.
L1-A (Stop-A) keys or
Break key • From a keyboard connected directly to the SPARC Enterprise
T2000 server, press the Stop and A keys simultaneously.
*
–or–
• From an alphanumeric terminal configured to access the system
console, press the Break key.
* Requires the OpenBoot configuration variable
input-device=keyboard
. For more information, see “Ac-
cessing the System Console Through a Local Graphics Monitor” on page 15 and “System Console OpenBoot
Configuration Variable Settings” on page 26 .
ALOM CMT
break
and
console
commands
From the
sc>
prompt, type the
break
command. Then issue the
console
command, provided the operating system software is
not running and the server is already under OpenBoot firmware
control.
Manual system reset From the
sc>
prompt, type:
sc> bootmode bootscript=”setenv auto-boot? false”
Press Enter.
then type:
sc> reset