Fujitsu SPARC Enterprise T2000, Руководство администратора, Страница: 34 / 98

12 SPARC Enterprise T2000 Server Administration Guide • April 2007
2. Open a terminal session on the connecting device, and type:
For example, for a SPARC Enterprise T2000 server connected to port 10000 on a
terminal server whose IP address is 192.20.30.10, you would type:
Accessing the System Console Through a Tip
Connection
Use this procedure to access the SPARC Enterprise T2000 server system console by
connecting the serial management port (SER MGT) to the serial port of another
system (
FIGURE 1-4
).
FIGURE 1-4
Tip Connection Between a SPARC Enterprise T2000 Server and Another
System
▼
To Access the System Console Through the Tip Connection
1. Connect the RJ-45 serial cable and, if required, the DB-9 or DB-25 adapter
provided.
The cable and adapter connect between another system’s serial port (typically TTYB)
and the serial management port on the back panel of the SPARC Enterprise T2000
server. Pinouts, part numbers, and other details about the serial cable and adapter
are provided in the service manual for your server.
% telnet
IP-address-of-terminal-server port-number
% telnet 192.20.30.10 10000