Fujitsu SPARC Enterprise M4000, Справочное руководство, Страница: 41 / 444

applynetwork(8)
System Administration 21
NAME applynetwork - reflect the information that has been set for the XSCF network
SYNOPSIS applynetwork [ [
-q
]
-{y|n}
] [
-M
]
applynetwork
-h
DESCRIPTION
applynetwork
(8) command reflects the information that has been set for the XSCF
network to XSCF.
When you set one of the following for the XSCF network, it is necessary to execute
the
applynetwork
(8) command to reflect the information to XSCF.
■
XSCF host name
■
DNS domain name
■
IP address
■
netmask
■
routing
When you execute the
applynetwork
(8)command, it displays the information
which has been set to XSCF host name, DNS domain name, name server, IP
address, net mask, and routing. After reflected the information of XSCF network,
use the
rebootxscf
(8) command to reset XSCF, to complete the setting.
Note –
If XSCF is reset without executing the
applynetwork
(8) command,
network information that is set is not reflected in XSCF. Also, information that is set
is deleted.
Privileges
You must have
platadm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "
y
" to execute the command or "
n
"
to cancel the command.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-M
Displays text by page. This option provides a function that is
the same as that of the
more
command.
-n
Automatically answers '
n
' (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-y
Automatically answers '
y
' (yes) to all prompts.