Emerald-P CPU Module
SK-86R12-CPU01
FSEUGCC-UM_MB86R12-CPU01_Rev1.1
- 7 -
© Fujitsu Semiconductor Europe GmbH
2 Startup CPU Module
-
Connect the CPU Module to the baseboard
-
Connect appropriate cables (HDMI, RS232, Power etc) to baseboard
(Please refer here to the Baseboard Manual
– see appendix)
-
Set switches SW1, SW11 and SW12 according to your needs (please refer here to
the Hardware Manual
– see appendix)
-
Power on baseboard
-
Demo starts up on HDMI output
Default settings for the CPU Module
:
-
Clock PLL set to 533MHZ
-
NOR Flash boot activated
-
Bootloader and Linux system flashed in NOR and NAND Flash
Figure 2-1: Board Layout
