Fujitsu Siemens SCENIC 600, Руководство по эксплуатации

Страница: 42 / 61

System expansions
34
A26361-K520-Z100-4-7619
Installing an accessible drive
Open the system unit (see " Opening the system unit ").
i
Should the chipcard reader get in the way of the accessible drive during installation, then
remove the reader (see "
Installing/removing a chipcard reader ").
A
B
1
2
Pry the plastic drive cover (A) out of the front cover.
Pry the shielding plate (B) on left-hand side out of the bay.
!
Do not throw away the covers. If you remove the drive again later, you will have to
reinstall the covers.
Take the new drive out of its packaging.
Make the required settings on the drive (if necessary, on installed drives as well).
2
1
A
B
A = Position of the screw for the upper drive
B = Position of the screw for the lower drive
Slide the drive into the system unit (1).
Plug the data and the power supply connectors into the drive.
Fasten the drive with the screw (2).
If you have removed the chipcard reader, then reinstall it.