CG00002-297901
©ScanZen
13
Cleaning the ADF (with cloth)
Cleaning should be performed approximately every 3,000 sheets scanned. As the scanner continues to
feed the documents, paper dust will accumulate inside the ADF and it may cause scanning errors.
Cleaning frequency varies depending on the types of documents you scan. For instance, it may be
necessary to clean the scanner more frequently when you scan documents on which the toner is not
sufficiently fused.
1. Turn off the scanner and wait for at least 15 minutes
2. Open the ADF.
3. Clean the following locations with a cloth moistened with F1 Cleaner or a Cleaning Wipe sheet.
ATTENTION
Do not use water or mild detergent to clean the ADF.
It may take a long time to dry if an excessive amount of F1 Cleaner is used. Use it in small
quantity. Wipe off the cleaner completely to leave no residue.
Glass
(x2)
CAUTION:
The inside of the scanner becomes very hot with use.
Before you begin cleaning the inside, turn the scanner off and let it cool down. Wait at
least 15 minutes for the ADF glass to cool.
