Fujitsu ScanSnap N1800, Руководство по эксплуатации

Страница: 462 / 543

8.3 Other Troubleshooting
462
■
Check item
Do the documents satisfy the conditions given in
"A.2 Paper Quality" (page
474) ?
■
Action
Use documents which satisfy the conditions described in "A.2 Paper Quality" (page 474) .
■
Check item
Has the document been loaded correctly into the ADF paper chute?
■
Action
Riffle and realign the document stack, then load it back into the ADF paper chute.
■
Check item
Is the document stack more than 5 mm thick?
■
Action
Remove sheets from the stack to reduce it to a thickness of 5 mm or less.
■
Check item
Is the pad assy dirty?
■
Action
Clean the pad assy.
For more details, refer to
"7.3 Cleaning Inside the Scanner" (page 420) .
■
Check item
Is the pad assy worn out?
■
Action
Replace the pad assy.
For more details, refer to
"7.5 Replacing Parts" (page 426) .
■ Check item
Do the documents satisfy the conditions given in
"A.2 Paper Quality" (page
474) ?
■
Action
Use documents which satisfy the conditions described in "A.2 Paper Quality" (page 474) .
■
Check item
Is the pick roller dirty?
■
Action
Clean the pick roller.
For more details, refer to
"7.3 Cleaning Inside the Scanner" (page 420) .
Multifeed errors occur frequently.
Paper is not fed into the scanner. (Pick errors are frequent or document
feed stops midway)