background image

67

 - Lithium ion Battery

Low Battery State 

When the battery is running low, a low battery notification message will appear. If you do not respond to 
the low battery message, the batteries will continue to discharge until they are too low to operate. When 
this happens, your notebook will go into Standby mode. There is no guarantee that your data will be saved 
once the notebook reaches this point.

Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until 
you provide a source of power either from an adapter, or a charged battery. Once you have provided power, 
you will need to press the Power/Suspend/Resume button to resume operation. 

In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is 
not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the 
data that was not stored. Once you provide power, you can continue to use your notebook while an adapter 
is charging the battery.

Shorted Batteries 

The Status Indicator panel uses an LED below the battery outline of the Battery Level indicator to display 
the operating level available in that battery. If this display shows a Shorted Battery, it means the battery is 
damaged and must be replaced so it does not damage other parts of your LifeBook notebook.

U

SING

 

HEAVY

 

CURRENT

 

DEVICES

 

SUCH

 

AS

 

THE

 

MODEM

 

OR

 

FREQUENT

 DVD/CD-RW/CD-ROM 

ACCESSES

 

MAY

 

PREVENT

 

CHARGING

 

COMPLETELY

.

O

NCE

 

THE

 

LOW

 

BATTERY

 

NOTIFICATION

 

MESSAGE

 

APPEARS

YOU

 

NEED

 

TO

 

SAVE

 

ALL

 

YOUR

 

ACTIVE

 

DATA

 

AND

 

PUT

 

YOUR

 L

IFE

B

OOK

 

NOTEBOOK

 

INTO

 S

TANDBY

 

MODE

 

UNTIL

 

YOU

 

CAN

 

PROVIDE

 

A

 

NEW

 

POWER

 

SOURCE

. Y

OU

 

SHOULD

 

PROVIDE

 

A

 

CHARGED

 

BATTERY

AN

 AC 

POWER

 

ADAPTER

OR

 A

UTO

/A

IRLINE

 

ADAPTER

 

AS

 

SOON

 

AS

 

POSSIBLE

.

 W

HEN

 

YOU

 

ARE

 

IN

 S

TANDBY

 

MODE

 

THERE

 

MUST

 

ALWAYS

 

BE

 

AT

 

LEAST

 

ONE

 

POWER

 

SOURCE

 

ACTIVE

. I

F

 

YOU

 

REMOVE

 

ALL

 

POWER

 

SOURCES

 

WHILE

 

YOUR

 L

IFE

B

OOK

 

NOTEBOOK

 

IS

 

IN

 S

TANDBY

 

MODE

ANY

 

DATA

 

THAT

 

HAS

 

NOT

 

BEEN

 

SAVED

 

TO

 

THE

 

HARD

 

DRIVE

 

WILL

 

BE

 

LOST

.

Содержание S6510 - LifeBook - Core 2 Duo GHz












































































































































































































Отзывы: