Assembly Instructions
SMARTCASE S500
__________________________________________________________________________________________________________________________________________________________
Page 4 of 23
www.fujitsu.com
Step 2 Mount the Cooler
Before mounting the board into the chassis, it is necessary to add hardware to it first (CPU, Cooler, RAM, plus any
optional additional hardware). First start with the back plate, which is essential for the cooler.
Do not take the stripe off the back plate for sticking it onto the backside of the board. The sticker is necessary for
isolation and safety.
Place the back plate underneath the board.
The side with the indentation has to be positioned
directly under the screw. The end of the back
plate’s notches should be visible after the process.
Back plate
